Mechanical & Ceramic Solutions Inc.

MCS Mechanical & Ceramic Solutions Inc.

Fabricated Products

MCS has an engineering department with degreed mechanical engineers who will measure and provide drawings of existing parts for direct replacement after the lining is added or who will design components to your specifications. Qualified employees working from approved engineering drawings and instructions perform fabrication work. Inspections are performed both in process and upon completion of the product.

segmented elbows with 1" thick pre-engineered alumina ceramic

Segmented elbows with 1" thick pre-engineered alumina ceramic.

Pipe laterals for ash handling system with 1" thick pre-engineered lining

Pipe laterals for ash handling system with 1" thick pre-engineered lining.

Mill shut-off valve with 1" pre-engineered lining.

Mill shut-off valve with 1" pre-engineered lining.

Complete material handling line hoper plus discharge piping

A complete material handling line - hopper plus discharge piping.

Mill Converter head

Mill Converter head.

Flop-Gate with 1' ceramic housig and chrome-carbide overlay on gate

Flop-Gate with 1" ceramic housing and chrome-carbide overlay on gate.

Ceramic lined damper housing gate is lined with 1/8" ceramic

Ceramic lined damper housing. Gate is lined with 1/8" ceramic.

Feed Bellf or coal plant

Feed Bell for coal plant.

Customer supplied stock feeder lined by MCS

Customer Supplied stock feeder lined by MCS.

learn more about fabricated products

next >

MCS Home | Materials, Adhesives, & Wear Compounds | Fabricated Products
Field Service | Contact Us | Vacuum Bonding